Skip to main content

Custompack NZ

PET/PP Strapping, Stretch Film, Timber Wrap, Strapping Tools, Clips & Edge Protectors : ships within 24 hours
High-Quality PET/PP strapping

sales@custompack.co.nz

Need help?

Battery Powered Strapping Tool

Battery Powered Strapping Tool

A pallet’s ready to go and the compressor’s on the other side of the warehouse. That’s the exact gap a battery strapping tool is built to close. No hose, no fixed strapping station, no walking a pallet over to where the air line reaches. Pick it up, strap it, move to the next one.

Our Battery Powered Strapping Tool is a cordless, handheld strapping machine built for PET and PP strapping across warehouse, freight, and manufacturing floors where mobility matters as much as tension. Some suppliers list the same category as a battery operated strapping tool or a battery operated PET strapping machine, and both describe this tool: it tensions, friction-welds, and cuts in one motion, so one operator can strap pallets anywhere on the floor without dragging a compressor or relying on manual buckle tension that varies from strap to strap.

Get a Quote

Product Details

  • Cordless operation: Runs on a rechargeable lithium-ion battery, so strapping isn't tied to a compressor, power outlet, or fixed station
  • Consistent strap tension: Sets tension force automatically at the same level every cycle, removing the guesswork a manual tensioner leaves to the operator's arm
  • One-motion tension, weld and cut: Tensions the strap, friction-welds the joint, and cuts the tail in a single trigger pull
  • Lightweight handheld design: Built to be carried and used one-handed across a full shift, unlike a bench-mounted or pneumatic strapping tool tethered to an air line
  • No metal seals to stock: Friction welding fuses the strap joint itself, so there's no separate seal or clip to buy, count, or run out of mid-shift
  • Faster than manual tools: A battery strapping tool cuts strapping time compared with a hand tensioner and sealer, since tension, weld, and cut happen in one motion instead of three separate steps
  • No compressor, no downtime chasing air pressure: Unlike a pneumatic strapping tool, there's no air line to run, no compressor to service, and no dip in tension when line pressure drops
  • Fewer failed straps: Even, repeatable tension force means fewer straps that snap loose in transit from an under-tensioned manual pull
  • Goes where the pallet is: A handheld strapping machine works equally well on a loading dock, in a timber yard, or between racking where a fixed pneumatic setup can't reach
  • Lower strain on the operator: Removes the repetitive hand-cranking a manual tensioner demands across a full shift of pallet strapping
  • Warehouses and distribution centres: A pallet strapping tool for dispatch-heavy floors, strapping loads at the point they leave rather than routing every pallet past a fixed station
  • Freight and logistics yards: Carton and pallet strapping on the dock, ahead of loading, where a cordless tool keeps pace with truck turnaround
  • Manufacturers: Strap boxed or palletised output on the production floor without running air lines to every station
  • Construction material suppliers: Secure framing, roofing, and aluminium product bundles on site or in the yard, where a pneumatic tool's air hose isn't practical
  • Export packers: Tension PET strapping consistently across mixed pallet runs headed to port
  • Timber yards and sawmills: Strap bundled timber on the yard floor without a fixed compressor setup

Customize Your Own PET Strapping

    Frequently Asked Questions

    What is a battery strapping tool used for?
    A battery strapping tool tensions, seals, and cuts PET or PP strapping around pallets, cartons, and bundled goods, without a compressor or manual hand-cranking. It suits warehouse, freight, and manufacturing environments where the strapping job moves around the floor.

    A battery operated strapping tool runs on a rechargeable battery and needs no air line, so it goes anywhere on the floor. A pneumatic strapping tool needs a compressor and hose but typically holds a slight edge in raw cycle speed at a fixed strapping station.

    Yes. Battery strapping tool, battery operated strapping tool, and plastic strapping machine battery operated all describe the same category: a cordless handheld tool that tensions and seals PET or PP strapping.

    It uses friction welding rather than heat sealing. The tool spins the overlapping strap ends against each other to generate heat and fuse the joint, then cuts the tail, all in one motion.
    Yes. It’s a common pallet strapping tool for NZ warehouses where loads move through dispatch quickly and a fixed pneumatic station isn’t practical for every strap.
    Yes. The same carton strapping tool handles both pallet loads and smaller bundled cartons, within the strap width the tool is rated for.

    CUSTOMPACK supplies battery, pneumatic, and manual strapping tool NZ-wide, alongside PET strapping, PP strapping, and stretch film, with 24-hour dispatch.