Skip to main content

Custompack NZ

PET/PP Strapping, Stretch Film, Timber Wrap, Strapping Tools, Seals & Edge Protectors : ships within 24 hours
High-Quality PET/PP strapping

sales@custompack.co.nz

Need help?

Strapping Corner Protectors

Strapping Corner Protectors

Strapping Corner Protectors

A strap holds only as well as its seal. Tension it without a proper seal and it slips, loosens in transit, or lets go before the load reaches its destination. Strapping seals, also called strapping clips, lock that tension in place for the life of the shipment.

CUSTOMPACK supplies strapping seals New Zealand wide for PET strapping, PP strapping, and steel strapping, used across warehouses, manufacturing, timber yards and export operations shipping palletised or bundled loads daily.

Specifications

Available in plastic or fibreboard construction, sized to strap width and load type. Thickness and dimensions vary from lightweight cardboard for cartons through to heavy-duty plastic for steel or export loads.

What They Do

A corner protector fits over the load edge, under the strap, and turns a line of pressure into a flat one. Without it, PET or PP strapping cuts into cardboard, timber, or soft edges once tensioned with a strapping tool.

  • Fits under PET or PP strapping at the pallet or carton edge
  • Prevents crushing, denting and cutting at load corners
  • Distributes strap tension across a wider surface
  • Suits palletised, boxed and bundled loads of varying shapes
Strapping Corner Protectors securing palletised cardboard sheets with green strapping bands.

Where They're Used

  • Furniture and appliances (protecting painted or laminate corners)
  • Cardboard cartons and export packaging
  • Palletised warehouse loads
  • Steel bar, coil and construction bundles (stopping strap cut-through)
  • Glass and panel products (preventing chipped or cracked edges)

If you’re already using PET or PP strapping on outbound loads, corner protectors are the accessory that stops the strap becoming the source of the damage.

Customize Your Own Strapping Tool

    Powered by CUSTOMPACK

    Frequently Asked Question

    What's the difference between a corner protector and an edge protector?
    Same function, different name. Both spread strap pressure across the load’s corner or edge.
    Commonly used with PET and PP strapping. The right protector depends on strap width and tension, CUSTOMPACK can confirm against your setup.
    Plastic protectors are generally reusable if undamaged. Fibreboard versions are typically single-use.
    Yes. Seals lock the strap in place; protectors protect the load underneath it. Different jobs, usually used together.

    Get the Right Corner Protection for Your Load

    Talk to CUSTOMPACK about matching strapping corner protectors to your strap width, tool, and load type. Get a quote and have it dispatched NZ-wide within 24 hours.

    Request a Free Quote

    Customize Your Packaging Solution